Guide complete sul posizionamento del ricamo sulle camicie

Placement of Embroidered Designs

Embroidery Placement is important because it allows you to have consistent sewing results and a good-looking product. Sewing over a seam on a shirt isn’t so bad, but sewing over a seam on a jean jacket can break the needle or worse. The placement of the embroidery determines the wearability of the garment and how it looks. A 20-inch-wide logo won’t fit on the edge of a sleeve, but it’s also not suitable for the back of a shirt unless it’s oversized.

Embroidery placement plan will allow you to work more successfully with clients and set yourself up for success. If you have a plan that you know you can stick to, it’s easier to talk yourself out of something you know won’t work. Will be. You can give the chart to a client or friend, show them the standard, and go from there.

Embroidery Placement also has a lot to do with hoops. Trying to fit a 130mm hoop into a shirt pocket won’t work (unless you like removing pockets, and that’s not a lot of fun!) Since you already know the size of your hoops, this gives you It will help to use designs that stay within these limits.

How To Determine The Embroidery Placement Measurement

To determine exactly where you should place the design, measure the width of the item, usually from one side seam to the other side seam on the fabric or, if there is a placket, from the placket to the side seam. fino a. Divide this measurement by two. Mark this measurement as a short vertical line. Mark the distance from the top seam/edge. Mark it as a horizontal line. The center point of these two lines will form the center of your disegno del ricamo space unless otherwise noted.

Tools for Perfect Embroidery Placement

Just you can decide what works for you and will make you comfortable so whatever you choose, be consistent and give it a chance to work.

• Placement Chart: They are available online and in printable form. These also work best as client intake forms so that both you and the client agree.
• T-shirt and placement rollers: These look like a cross or T-square, some have cut-outs for the neck of the shirt and are designed to be used on a shirt that is laid flat. You can use a tailor’s chalk or a washable marker to carefully mark the placement lines of your design.
• Plain ole’ tape measure: A tape measure is all that’s needed as long as you’re consistent with the measuring points. Di nuovo, you are the best judge of what works for you!
• Hopping Systems: These are becoming very popular and for a reason. They work! Hooping stations are meant to hold a magnetic or regular hoop while you slide the garment on and then set your hoop in place. They are usually shaped like a t-shirt outline with an extension where your neck would be. A hooping station is just that – it will be the heart of your garment embroidery work and although they may seem expensive in the end they save your wrists, your money, and your sanity!

Embroidery Placement On Shirt And Jackets

Jackets are generally the same as shirts, but the type of jacket can limit you. The yokes will change the placement and size, and other features such as studs, gioielleria, and interior, and exterior pockets will make the decisions for you.

Terms of shirts and jackets

• T-shirts: These will be the most common garment that you embroider on. There is a neckline, which is high from the front to the back on most shirts. They come as round necks, (most common) boat necks (the opening is wide and not deep—resembling a boat), and V necks. The collar is almost always folded over a ribbed knit band. (Your marks on it are front center) Fold the shirt in half, holding the shoulder seams together. Mark the center with a pin. Just because your new t-shirt has a crease in the middle doesn’t mean it’s the center point! Be sure to measure for yourself.
• Collar, polo, and dress shirts: The main difference between a t-shirt and a collar or polo is the V-neck placket where the buttons and buttonholes are. From the center point of the placket, the center of the shirt is measured (Nota: Make sure to leave these buttons open as this will help the shirt retain its shape)
• Giacche: Jackets are just big, heavy shirts with long sleeves, but they can have a few more obstacles! The yoke is the topmost part across the shoulders, and there may be right and left yokes in front. Remember that even though you can embroider here, be sure to consider the width of the seam allowance on the inside. Use your fingers to nip and see where the edge of the fabric is.

Right sizes and measurements for shirts and jackets

Tipicamente, shirt logos are placed on the left chest (above your heart), but they are often seen on the right chest. The correct size is about 3-4 pollici (or a little more for larger shirts) e 2-3 inches high. Sicuro, you can make them any size you like, but before you hit the start button, make a paper cutout and place it on the shirt to see how big it really is! Many times we see images on the screen that just look so big that they are dwarfed by the shirt (by the way, it works the other way around too – it prevents you from going too big).

The shirt back (full back) seam is usually 11-12 inches wide and as long as your shirt will allow but remember that less is more and stay around 12-14 inches long. Short, lungo, di grandi dimensioni, and short shirts will vary.

To place the shirt front embroidery correctly, it should be horizontally at a point between the center line and the sleeve seam and vertically between the shoulder seam and the bottom of the sleeve. For the back, it should be placed on the centerline between the shoulder blades, and at the center point between the collar seam and the seam under your arm. These may vary, but this is a good starting point.

Tips For Perfect Embroidery Placement

Watch out for hazards

You may not realize it, but there are many hidden dangers lurking in your embroidery piece. Always feel the material and look for zippers, bottoni, Velcro, seams, or heavy associating. This is especially important during bag embroidery. Attempting to embroider on them can cause the needle to break and damage your machine.

Measure twice, sew once!

We must emphasize the importance of careful measurement before pressing the start button. If needed, a small checklist on hand at your workstation will help you make sure you’ve covered the bases! You can use chalk markers, invisible pens, perni, or whatever method works best for you. Sometimes it is helpful to step away for a moment and then come back and check your machine before starting it.

Know your stabilizer.

It is important to mention that when embroidering clothes you need the right stabilizer. If you are using a stabilizer with your skin, always use a no-show mesh or cutaway stabilizer as they will soften over time. A layer of wash on top, botto
M, and top of your towels work wonders.

How to determine bad placement

The bad news is that once the embroidery is complete, it’s hard to pinpoint a bad spot. good news? Even if you start the machine, there are some ways to save your clothes.

Remove Stitches – If you work carefully, you can remove stitches and start over in many cases. It is important to work slowly from the back of your dress.

Over slicing – If you start and realize you’ve made a mistake, stop immediately. In alcuni casi, you can reposition and reattach to the beginning of the previous design (provided it’s not too dense).

Be creative, do something new. Before you toss that shirt in the scrap heap, think about how you can restore it. Applique, patch making, and other techniques can be good solutions.

Conclusione

We’ve covered the terms jackets, camicie, and hats in a variety of places, but for an easy takeaway, here are the key points to remember:

• Measure twice, sew once and use the best measuring method that works for you.
• Prenditi il ​​​​tuo tempo, and walk away if necessary.
• Use some of the available measuring aids, such as placement charts, rulers, and hooping systems.
• Always check for hidden threats. And the last thing is to damage your machine.

Con la pratica, you’ll soon find the right placement on your garment, ensuring a happy customer, macchina, and yourself!